Skip to content
  1. Home
  2. Flooring guide
  3. Commercial spaces
Commercial spaces · 6 min

Homogeneous or heterogeneous PVC flooring: what is the difference and which to choose

Homogeneous flooring is solid – the pattern and colour run through the full thickness, so the whole thickness is the wear layer. Heterogeneous flooring consists of several layers: a base at the bottom, the décor in the middle and a transparent wear layer on top. For the busiest public spaces we offer homogeneous Tarkett iQ Granit, while heterogeneous Tarkett Spark gives more design freedom.

Updated 2026-10-21 · Flooringas specialists · Sources – manufacturers' datasheets

Structure: one layer or several

Homogeneous PVC flooring (ISO 10581) made from a single solid mass. The wearing surface, pattern and colour do not change, because they run through the whole thickness. Tarkett iQ Granit is a 2 mm thick covering whose wear layer is its entire thickness.

Heterogeneous PVC flooring (EN 649) – layered: a stable base, a printed décor and a transparent wear layer with a protective coating. This structure makes it possible to create a wood, stone or any other pattern. Incidentally, all our ADORE® vinyl flooring is also classed in the manufacturer sheets as heterogeneous PVC flooring.

Tarkett iQ GranitTarkett Spark
TypeHomogeneous (ISO 10581)Heterogeneous
Thickness2,0 mm2,0 mm
Wear layerFull thickness – 2,0 mm0,70 mm
SurfaceiQ PUR, renewed by dry buffingX-TREME protection
Usage classes34 · 4334 · 43
FormatRoll 2 × 25 m or 610 × 610 mm tiles (14 pcs – 5,20 m²)Roll 2 × 25 m
Typical roomsSchools, healthcare facilities, offices, shops, public corridorsOffices, shops, schools, healthcare facilities, public corridors

When to choose homogeneous

  • The heaviest traffic. Corridors, halls and stairwells where the covering wears daily.
  • A long service life with renewal. The iQ Granit surface is renewed by dry buffing – there is no need to replace the covering to make it look neat again.
  • Educational and healthcare institutions. iQ Granit is Tarkett's solution for these spaces.
  • Tile format. iQ Granit is also supplied as 610 × 610 mm tiles – convenient for zoning or replacing part of the covering.

When to choose heterogeneous

  • Design. More pattern and colour options – the Spark collection has different design series.
  • Heavily used commercial spaces. Spark with a 0,70 mm wear layer and classes 34/43 is designed for heavy traffic.
  • Balance of budget and durability in large spaces where a seamless, easy-to-clean surface matters.

Installation: professional in both cases

PVC roll flooring is glued over the full area. We use Kiilto Extra – an acrylic dispersion adhesive for PVC coverings (coverage 4–6 m²/l), prime the concrete with Kiilto Start Primer and level unevenness with Kiilto compounds. In commercial premises the roll seams are usually heat-welded so that the surface is seamless.

  1. SubfloorDry, firm, level, dust-free. Concrete moisture when gluing – max. 3,5 w-% or 85 % RH (Kiilto Extra).
  2. LevellingA low-alkalinity levelling compound protects the adhesive and the covering from the alkaline moisture of concrete.
  3. GluingThe covering is glued with Kiilto Extra, following the covering manufacturer's instructions.
  4. Seams and finishingThe seams are welded, and finishing at the walls is done according to the design.

When choosing between these two types, it is worth thinking not only about today's needs but also about how the room will be used in ten years. If heavy traffic and long use of the covering without replacement are planned, homogeneous flooring with a renewable surface is often the most rational choice.

How to choose: a short decision tree

  1. Does the room have very heavy traffic?If so – both Tarkett coverings are class 34. Choose according to whether a renewable surface (iQ Granit) or the design (Spark) matters more.
  2. Is surface renewal important?iQ Granit with an iQ PUR surface is renewed by dry buffing.
  3. Do you need a tile format?610 × 610 mm tiles are available only in the iQ Granit collection.
  4. Is a specific pattern important?Heterogeneous flooring offers more design freedom.

Colours and zoning

The iQ Granit colour card offers a wide choice: from neutral greys and sand shades to bright blues, greens, oranges or yellows. This lets you zone corridors by colour, mark directions or set apart functional spaces in schools and healthcare facilities. The Spark collection has several design series, so the covering is easy to match to an office or shop interior.

In commercial spaces it is also important that the covering is coordinated with the wall finishes and door thresholds. We discuss these solutions during the site assessment and include them in the quote.

Care for the long term

The surface of homogeneous iQ Granit is designed so that it can be renewed by dry buffing. This is convenient for schools and healthcare facilities, where the floor must look neat for a long time without replacing the covering. Spark has an X-TREME protective surface designed for the heavy traffic of commercial spaces.

In both cases the most important things are dirt-trapping zones at entrances and regular cleaning according to traffic. We recommend planning the care schedule at the design stage.

Compare iQ Granit and SparkThickness, wear layer, surface and formats – in one table.
From our collections

Homogeneous coverings

From our collections

Heterogeneous coverings

The essentials in brief

  • Homogeneous flooring is solid – its wear layer is its entire thickness.
  • Heterogeneous flooring is layered and offers more design freedom.
  • The iQ Granit surface is renewed by dry buffing; also supplied as tiles.
  • Both Tarkett coverings are classes 34 and 43 and are glued professionally.
A professional solution for a projectFor schools, healthcare facilities, offices and shops we select the covering, calculate the quantity and provide an installation quote.
FLOORINGAS PRO
DUK

In brief about this

Is ADORE® vinyl flooring homogeneous?

No. In the ADORE® technical data sheets they are classed as heterogeneous PVC flooring (EN 649).

How is the iQ Granit surface renewed?

The iQ PUR surface is renewed by dry buffing.

What classes are iQ Granit and Spark?

Both coverings are rated classes 34 (very heavy commercial) and 43 (heavy industrial).

Can iQ Granit be bought as tiles?

Yes, as 610 × 610 mm tiles – 14 pcs in a pack, 5,20 m².

Flooringas showroom · Kaunas

See and calculate and install

Order samples, a measurement, or drop by our showroom at Draugystės g. 21, Kaunas. You will see the whole project in your My Flooringas account.